Paw Print Window or Bumper Sticker - Get your Woof On in 13 Colors!

Die-cut WOOF decal sticker can be applied to most surfaces including car windows and bumpers. It's so easy to apply, just peel, stick and rub. The WOOF sticker is oval shaped and approximately 5.9" L x 3.9" H.  Available in 13 colors. 

 

The vinyl decals come in three pieces:

  Top layer - a transparent transfer tape

  Middle layer - the actual decal

  Bottom layer - wax backing

Application Tips:
1. Do not apply on extreme cold or hot Surfaces. Ideal temperature must be between 60°F & 90°F.
2. Do not touch the adhesive backing, oils from your skin will prevent sticking.
3. Before applying decal make sure there is no wax or oily products on the surface
  
Easy Application Instructions:
1. Rub the sticker to be sure the transfer tape is properly adhered to the sticker.
2. Clean and dry the desired area. Stickers will stick best to clean smooth surfaces.
3. Remove the wax backing slowly making sure the sticker stays adhered to the transparent transfer tape
4. Carefully position the sticker to the desired area. 
5. Rub the sticker from one side to the other, eliminating any air bubbles.
6. Use a object like a credit card to make sure the entire sticker is fully adhered to the surface.
7. Slowly remove the transfer tape, making sure no part of the sticker remains on the transfer tape.
8. Check for air bubbles. In most cases air bubbles can be worked to the edge of the sticker,  but if not, a pin hole will allow the air out and become virtually invisible.
Your sticker is now worry free! Once applied do not wash for 24 hours. Expect sticker life is approximately 5 years.